Description The TBS Lucid H7 Stack 8S 60A is an elite powerhouse built for serious pilots demanding ultimate performance. With a lightning-fast STM32H743 MCU, dual ICM42688 gyros, 13 PWM outputs, and 8S 60A-rated AM32 ESC, it delivers unmatched precision, responsiveness, and durability for advanced freestyle, cinematic, or long-range builds—plus onboard MicroSD blackbox logging, dual camera switching, CAN bus support, and bi-directional DShot for total flight control. FC Specifications: MCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash. Gyro: ICM42688 x 2 (duo gyro) OSD Chip: AT7456E (SPI2) Barometer: Infineon DPS310 connected via I2C2. PWM Outputs: 13 channels, including a dedicated “LED” pad. Blackbox (BB): Data logging equipped with a MicroSD card slot (SDIO) UARTs: 7 total (1, 2, 3, 4, 6, 7, 8) signal inversion ready I2C Buses: 2 available. CAN Bus: 1 available. Analog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2). LED Indicators: 3 LEDs (Blue, Green for FC Status, Red for 3.3V Power). Breakout: SPI3 breakout available. USB Interface: Type-C connector (USB 2.0 standard). JST Connectors: 1x JST-SH1.0 8-pin (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25 4-pin (5V/CAN-H/CAN-L/Ground). Dual Camera Input: Switchable inputs for two cameras. Power Control: Switch for filtered 5V/Vbat output power. DJI FPV OSD: Compatible via any spare UART port. ESC Specifications: ESC Software: AlkaMotors32 (AM32) ESC Target: tbslu8s4in1 Rated Current: 60A × 4 (60 seconds) Peak Current: 85A × 4 (30 seconds) Propellers: Up to 11″ (over 7″ requires good airflow) Input: 3–8S LiPo Protocol: Bi-directional DShot 300/600, KISS ESC Telemetry ESC Current Port: Yes BEC: No Size: 50mm × 42mm Mounting Options: Gorilla-mount (39.5 × 16.0mm) 30.5 × 30.5mm Brackets for 20 × 20mm Weight: 17.58g (22g including brackets) Package Includes: 1 x TBS Lucid H7 Stack 8S 60A
